ESR60/70 Accessories

Replacement full enclosure sets. These include new button-tops, front moulding, rear moulding, front panel overlay, rear label and set of screws.

Replacement full enclosure sets. These include new button-tops, front moulding, rear moulding, front panel overlay, rear label and set of screws.

Replacement overlays for your Peak Atlas product. Item is self adhesive, ensure your enclosure is clean before applying your new overlay.

Replacement overlays for your Peak Atlas product. Item is self adhesive, ensure your enclosure is clean before applying your new overlay.

This case is tough, very tough. With space for accessories too, this case will protect your instrument wherever you go. It's finished with high quality stitching and an embossed Peak logo. Complete with removable fabric carry strap (150mm length).

External dimensions are 150mm x 120mm x 40mm. We do not recommend that you fit two instruments in this case (it's a bit tight and the 'on' buttons can get pressed).

Many customers have asked for this! Two instruments can be housed in this really smart case. There is even enough space for the range of probe accessories, such as the Tweezers, Crocs, USB stick and of course, spare batteries. The machined foam will firmly protect your investment for years to come. The surface finish is a black spark texture with a gold logo. Body dimensions are approximately 230mm x 170mm x 45mm (9" x 7" x 2").
Contents shown are not included.

Replacement alkaline batteries for many of our current analyser products. These batteries are of the highest quality and have been chosen to provide excellent life together with superb leak resistance. These batteries are also suitable for many other applications that require the MN21 type battery, such as remote key-fobs, electronic lighters etc...
Please note that later Atlas SCR units and the DCA Pro require AAA cells.

GP23 Batteries measure 28.5mm x 10mm dia.

A high quality 16x2 char STN LCD module. It uses the industry standard LCD interface, 16 way 1.27mm pitch. The module measures 59mm x 29.5mm, display area is 64mm x 15mm, two mounting centres are 50mm apart. Overall thickness including bezel is 3.8mm (4.8mm for chip locations). Supplied with protective screen layer and a 15-way connector (rightmost pad of LCD is not used).
It is important that you check the display type you need, older Peak instruments had larger displays fitted. Module here is 59x29.5mm. Contrast resistor may need changing to 3k3 to work with this display.

A pair of extremely sharp gold plated probes, primarily designed for the Atlas ESR and Atlas ESR PLUS. These gold needles feature our new standard 2mm sockets, allowing them to be fitted to industry standard 2mm banana plugs. Even the 2mm sockets are gold plated.

Each probe is 90mm long, is fully insulated except for the 13mm sharp gold needle. These are VERY sharp and care must be used! The needles can be bent with rough treatment.

Please note, your ESR unit must be fitted with 2mm plugs to be used with these probes. These probes are ONLY suitable for ESR units with firmware version 4.1 or later.

A pair of stunning gold plated prods, primarily designed for the Atlas ESR and Atlas ESR PLUS. These gold prods feature our new standard 2mm sockets, allowing them to be fitted to industry standard 2mm banana plugs. Even the 2mm sockets are gold plated.

Each prod is 85mm long, is fully insulated except for the 5mm sharp gold tip. The slender design is ideal for reaching tricky parts of equipment whilst maintaining maximum safety and control.

Please note, your ESR unit must be fitted with 2mm plugs to be used with these probes. These probes are ONLY suitable for ESR units with firmware version 4.1 or later.

Optional gold plated hook probes for the Atlas ESR. Complete with gold plated 2mm sockets. Each probe body measures 47mm in length.

Both probes feature black and grey mouldings and are designed to suit the Atlas ESR range of testers.

SMD tweezers designed for the 2mm LCR or ESR plugs. These tweezers are superb quality, with gold plated tips and compatible with industry standard 2mm banana plugs. These fit easily and securely to the 2mm LCR or ESR plugs.

The gold tips can touch together which means they are suitable for even the smallest parts (smaller than 0402s for example). Additionally, the tips can open wide enough for very large SMD parts (such as Case D tantalums or even larger).

Supplied with fitting and probe compensation instructions.

(Please note that these tweezers are not compatible with 0.63mm square pin socket connectors.)

A pair of very high quality, black-booted, gold-plated, croc clips designed for the new 2mm ESR plugs. The sockets are superb quality, gold plated and compatible with industry standard 2mm banana plugs. These fit easily and securely to the 2mm ESR plugs. Please ensure your lead has the gold plated 2mm (male) plugs on the end. If your ESR unit does not already have 2mm plugs on then you need to order the ESR full lead set (which includes the crocs too).

A superb flexible silicone 460mm long (18") lead set for the Atlas ESR and Atlas ESR PLUS featuring our new gold plated 2mm sprung banana plugs. Supplied with gold plated crocs that fit securely to the new lead.

This new lead set allows a wide range of new 2mm compatible probes to be fitted easily and securely. This item is for you to fit yourself. If you want us to fit for you then please selected the "fitted" version.

A superb flexible silicone 460mm long (18") lead set for the Atlas ESR and Atlas ESR PLUS featuring our new gold plated 2mm sprung banana plugs. Supplied with gold plated crocs that fit securely to the new lead.

This new lead set allows a wide range of new 2mm compatible probes to be fitted easily and securely. We will fit these for you, so please send your ESR unit to the address on our contact page. If you prefer to fit these leads yourself then please select the "DIY fit" version.