A superb new extra long (275mm) coax lead set for the Atlas LCR featuring gold plated 2mm sprung banana plugs. Supplied with stunning new hook probes that fit securely to the new lead.

This new lead set allows a wide range of new 2mm compatible probes to be fitted easily and securely. You can solder the leads yourself (very detailed instructions provided) or ask us to do it for you. If you want us to fit for you then there is an additional charge of just £1.50 plus return p&p. You can send your LCR to the address on our contact page.

A pair of very high quality croc clips designed for the new 2mm LCR plugs. The sockets are superb quality, gold plated and compatible with industry standard 2mm banana plugs. These fit easily and securely to the 2mm LCR plugs.

Supplied with fitting and probe compensation instructions.

(Please note that these crocs are not compatible with 0.63mm square pin socket connectors.)

A pair of very high quality SMD tweezers designed for the new 2mm LCR plugs. These tweezers are superb quality, with gold plated tips and compatible with industry standard 2mm banana plugs. These fit easily and securely to the 2mm LCR plugs.

The gold tips can touch together which means they are suitable for even the smallest parts (smaller than 0402s for example). Additionally, the tips can open wide enough for very large SMD parts (such as Case D tantalums or even larger).

Supplied with fitting and probe compensation instructions.

(Please note that these tweezers are not compatible with 0.63mm square pin socket connectors.)

A superb new extra long (460mm!) lead set for the Atlas ESR and Atlas ESR PLUS featuring our new gold plated 2mm sprung banana plugs. Supplied with gold plated crocs that fit securely to the new lead.

This new lead set allows a wide range of new 2mm compatible probes to be fitted easily and securely. You can solder the leads yourself (very detailed instructions provided) or ask us to do it for you. If you want us to fit for you then there is an additional charge of just £1.50 plus return p&p. You can send your ESR unit to the address on our contact page.

A pair of stunning gold plated prods, primarily designed for the Atlas ESR and Atlas ESR PLUS. These gold prods feature our new standard 2mm sockets, allowing them to be fitted to industry standard 2mm banana plugs. Even the 2mm sockets are gold plated.

Each prod is 85mm long, is fully insulated except for the 5mm sharp gold tip. The slender design is ideal for reaching tricky parts of equipment whilst maintaining maximum safety and control.

Please note, your ESR unit must be fitted with 2mm plugs to be used with these probes.

A pair of extremely sharp gold plated probes, primarily designed for the Atlas ESR and Atlas ESR PLUS. These gold needles feature our new standard 2mm sockets, allowing them to be fitted to industry standard 2mm banana plugs. Even the 2mm sockets are gold plated.

Each probe is 90mm long, is fully insulated except for the 13mm sharp gold needle. These are VERY sharp and care must be used! The needles can be bent with rough treatment.

Please note, your ESR unit must be fitted with 2mm plugs to be used with these probes.

A high quality cable terminated with a Type A USB plug and a Mini 5-pin plug. Ideal for many applications such as digital cameras and, of course, our Eddi Data Logger. Overall length is 2m (about 6'6''). Supplied in a sealed packet.

Fabulous tough probes for the Atlas DCA and the Atlas SCR. Note that the Atlas DCA and SCR are now supplied complete with these fitted probes. The cables are extra-flex type of 160mm (6") length and 2.0mm overall diameter. These premium probes are gold plated with an overall body length of 48mm (1¾"). Cable ends are pre-tinned for easy fitting to your analyser. Supplied as a set of Red, Green and Blue.

Batteries measure 28.5mm x 10mm dia.

More batteries here

It is important that you check the display type you need, older instruments had larger displays fitted. Module here is 59x29.5mm.

This display is a suitable replacement for damaged displays in our LCR40, UTP05, ESR60, SCR100, EDD03 and recent DCA55 instruments.

Using the new ID Terminators provides all the existing functions of cable type identification and fault detection in addition to cable-run identification. Now you can analyse and identify lots of cables without needing to make lots of trips to swap terminators. Sets of 8 unique ID Terminators are available (numbers 01-08, 09-16, 17-24).

Pictured above (black item), offered here as replacement for your lost or damaged terminators, it's also handy to have extra!

These are identical to the ones normally supplied with the Atlas IT Network Cable Analyser, they provide all the cable testing and connection pattern functions. 

A useful adapter that enables testing and analysis of network cables that have not been terminated with a plug or socket. Also useful for testing and prototyping non-standard connection configurations. Supplied with gold plated crocodile clips and high quality strain relief on all joints. Cable is stranded for extra flexibility.